小直径棒材超声横波检测仿真分析

采用超声水浸聚焦斜入射方式进行小棒材表面、近表缺陷检测时,声波在水/棒和棒/缺陷界面会发生反射、折射、散射、衍射及波形转换等一系列物理变换。此时缺陷可检性对声波入射条件十分敏感,常出现由于检测条件设置不当而导致缺陷漏检、误检的情况。为解决这一问题,本文针对小棒材超声斜入射检测中的主要参数——入射角和水距,开展声场及缺陷声响应仿真,研究检测参数对不同部位缺陷检测能力的影响,并对仿真结果进行试验验证。通过研究得到了检测水距、入射角度对缺陷检测能力的影响,并得到最优检测条件。试验验证结果表明研究制定的检测方案可有效检测出表面、近表面裂纹缺陷。     

Microstructure and dielectric study of pure BST and doped BSTF ceramic materials by broadband dielectric spectroscopy

Pure BST and doped BSTF (with BSTF2: Fe₂O₃ 2 wt % and BSTF4: Fe₂O₃ 4 wt %) ceramics were prepared by solid state reaction. XRD pattern showed the different phases were formed depend on the weight percent of Fe₂O₃. The crystal size and lattice parameters increased while the lattice strain decreased. The topography of the sintered samples shows increase of the grain size with increasing Fe₂O₃ ratio and hence enhances the compaction of ceramics. Broadband dielectric spectroscopy was employed to investigate the effect of magnetite nanoparticle on the dielectric properties of the pure BST ceramic. The interfacial polarization and the conductivity contribution reflect the high values of permittivity and its gradual increase as frequency decreases. The two BSTF samples show relaxation peak dynamic originated from presence of immobile species/electrons at low temperatures and defects/vacancies results from the formation of oxygen vacancies originates from the spontaneous change in oxidation states of Fe ions (Fe ^3+/Fe²⁺) at high temperatures. The relaxation rate obeys Arrhenius law at high temperatures in case of BST sample with activation energy 225 kJ/mol. This high value of activation energy at higher temperatures reflects and confirms the slowed down of the dynamics at the interphase and the decoupling nature of the OH-dynamic and the interfacial polarization.     

La单掺4H-SiC电子结构和光学性质的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法，对未掺杂及La掺杂4H-SiC的电子结构和光学性质进行理论计算。计算结果表明，未掺杂4C-SiC其禁带宽度为2.257 eV。La掺杂后带隙宽度下降为1.1143eV，导带最低点为G点，价带最高点为F点，是P型间接半导体。掺杂La原子在价带的低能区间贡献比较大，而对价带的高能区和导带的贡献比较小。未掺杂4H-SiC在光子能量为6.25 eV时，出现一个介电峰，这是由于价带电子向导带电子跃迁产生。而La掺杂后，出现3个介电峰，分别对应的光子能量为0.47eV、2.67eV、6.21eV，前两个介电峰是由于价带电子向杂质能级跃迁产生，第三个介电峰是由于价带电子向导带电子跃迁产生。La掺杂后4H-SiC变成负介电半导体材料。未掺杂4h-SiC的静态介电常数为2.01，La掺杂的静态常数为12.01。     

The optimization of hydrothermal process of MoS_2 nanosheets and their good microwave absorption performances

In this study,flower-like MoS_2 constructed by nanosheets was synthesized by a simple hydrothermal method.The hydrothermal process was optimized and the effects of hydrothermal condition,including reaction temperature,reaction time and the ratio of Mo source to S source(Mo:S) in precursor,on microwave absorption performances and dielectric properties were investigated.Our results showed that when the reaction temperature was 180℃,the reaction time was 18 h,and the Mo:S was 1:3.5,the synthesized MoS_2 had the best performance:Its minimum reflection loss could reach-55.78 dB,and the corresponding matching thickness was 2.30 mm with a wide effective bandwidth of 5.17 GHz.Further researches on the microwave absorption mechanism revealed that in addition to the destructive interference of electromagnetic waves,various polarization phenomena such as defect dipole polarization were the main reasons for microwave loss.We believe that MoS_2 is a candidate for a practical microwave absorbent.     

Lanthanum trilactate: Vibrational spectroscopic study − infrared/Raman spectroscopy

In this study lanthanum trilactate was prepared by neutralization reaction of lactic acid and lanthanum oxide, purified and identified by X-ray powder diffraction. Infrared spectra (Mid-IR region 4000–650 cm⁻¹) and Raman spectra (Stokes region 4000–100 cm⁻¹) of the high quality crystalline samples have been recorded and presented for the first time. For comparison DFT calculations were performed using Gaussian 09 D.01 and agreement between predicted and measured spectral data has been achieved. Acquired information can be utilized for substance identification for example in various industrial applications or in biological systems.     

Monoclinic β-Li2TiO3: Neutron diffraction study and estimation of Li diffusion pathways

A neutron powder diffraction study on lithium titanate Li₂TiO₃ was performed at low temperatures. The monoclinic β-phase has been found to be stable over the whole investigated range of temperatures (4 K–300 K). A smooth and nonlinear increase of the lattice parameters has been observed upon heating and correlated to the behavior of interatomic distances. Lithium diffusion pathways in Li₂TiO₃ were estimated theoretically on the basis of the obtained structural data using bond-valence modeling. Experimentally diffusion pathways were evaluated by analysis of the negative nuclear scattering densities at 1073 K, which were reconstructed using a maximum entropy method. Although the bond-valence mismatch map indicated a possible Li diffusion either in ab plane or along c direction, analysis of the experimental data revealed that Li migration is thermodynamically less feasible in latter case.     

Study of electron-vibrational interaction and concentration quenching effect of Cu+ ions in lithium based sulphate phosphors

The objective of this work is to study electron-vibrational interaction (EVI) and concentration quenching and their manifestation in experimental photoluminescence spectra of Cu⁺ ion in various lithium based phosphors namely, Li₂SO₄, LiNaSO₄ and LiKSO₄. The main parameters of EVI, such as the Stokes shift, Huang-Rhys factor and zero-phonon line positions, were estimated. The studied systems shows strong electron lattice coupling. The validity of results was established by modeling the shape of the emission spectra, which was found to be in good agreement with experimental photoluminescence spectra. The concentration quenching study is also carried out for these compounds. The studied systems correspond to the nearest neighbor energy transfer mechanism.     

Potts models with magnetic field: Arithmetic,geometry, and computation

We give a sheaf theoretic interpretation of Potts models with external magnetic field, in terms of constructible sheaves and their Euler characteristics. We show that the polynomial countability question for the hypersurfaces defined by the vanishing of the partition function is affected by changes in the magnetic field: elementary examples suffice to see non-polynomially countable cases that become polynomially countable after a perturbation of the magnetic field. The same recursive formula for the Grothendieck classes, under edge-doubling operations, holds as in the case without magnetic field, but the closed formulae for specific examples like banana graphs differ in the presence of magnetic field. We give examples of computation of the Euler characteristic with compact support, for the set of real zeros, and find a similar exponential growth with the size of the graph. This can be viewed as a measure of topological and algorithmic complexity. We also consider the computational complexity question for evaluations of the polynomial, and show both tractable and NP-hard examples, using dynamic programming.     

(3S,4S)-4-氨基-3-羟基-6-甲基庚酸的合成

价廉易得的L-亮氨酸先以苄基同时保护氨基及羧基得(S)-2-(二苄胺基)-4-甲基戊酸苄酯,进而在碱性条件下与乙腈发生亲核取代反应得(S)-4-(二苄胺基)-6-甲基-3-氧代庚腈,再经硼氢化钠选择性还原羰基得(3S,4S)-4-(二苄胺基)-3-羟基-6-甲基庚腈,用双氧水氧化得(3S,4S)-4-(二苄胺基)-3-羟基-6-甲基庚酸,最后在Pd(OH)2/C-H2作用下脱掉苄基得到(3S,4S)-4-氨基-3-羟基-6-甲基庚酸,即(3S,4S)-statine。整个合成路线总产率为33.6%。     

Defects related emission and nanosecond optical power limiting in CuS quantum dots

We report optical and nonlinear optical properties of CuS quantum dots and nanoparticles prepared through a nontoxic, green, one-pot synthesis method. The presence of surface states and defects in the quantum dots are evident from the luminescent behavior and enhanced nonlinear optical properties measured using the open aperture Z-scan, employing 5 ns laser pulses at 532 nm. The quantum dots exhibit large effective third order nonlinear optical coefficients with a relatively lower optical limiting threshold of 2.3 J cm⁻², and the optical nonlinearity arises largely from absorption saturation and excited state absorption. Results suggest that these materials are potential candidates for designing efficient optical limiters with applications in laser safety devices.